Better Light GEM-ACM1D Spezifikationen PDF herunterladen (Seite 14)

then blink once per second (indicating it is communicat-

ing with the panel). The third Low Battery LED should

be off unless it detects a low battery.

Confirm all connections are correctly wired, all system

troubles are cleared, and all zones are closed. Test all

aspects of the system including access (use a pro-

grammed proximity card), all wired accessories (such

as the Request to Exit (RTE) button), all keypads and

zones (such as door ajar, etc.).

GEM-ACM1D System Troubles

A keypad ACM System Trouble display will be followed by

one or more of the following error codes:

E11-NNN - KEYPAD/ACM TAMPER.

GEM-ACM1D ac-

cessory cover opened or removed. NNN is keypad

number.

E10-NNN - KEYPAD/ACM TROUBLE. ACM no response

to poll, buss not communicating with panel. NNN is

keypad number. Zones mapped to the access doors

will indicate faulted.

E54-000 - LOW BATT NO/AC. Power failure for ACM #1.

Check power transformer. Check for blown fuse or cir-

cuit breaker; general power outage. Also may indicate

battery below 11 volts. If battery not recharged

within 24 hours, replace it.

E55-000 - LOW BATT NO/AC.

Power failure for ACM #2.

Check power transformer. Check for blown fuse or cir-

cuit breaker; general power outage. Also may indicate

battery below 11 volts. If battery not recharged

within 24 hours, replace it.

E56-000 - LOW BATT NO/AC. Power failure for ACM #3.

Check power transformer. Check for blown fuse or cir-

cuit breaker; general power outage. Also may indicate

battery below 11 volts. If battery not recharged

within 24 hours, replace it.

E57-000 - LOW BATT NO/AC. Power failure for ACM #4.

Check power transformer. Check for blown fuse or cir-

cuit breaker; general power outage. Also may indicate

battery below 11 volts. If battery not recharged

within 24 hours, replace it.

PROGRAMMING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Keine Kommentare

Better Light GEM-ACM1D Spezifikationen Seite 14